dB Technologies Ingenia IG2T: A Closer Look at This Compact Active Column Speaker

Anyone that’s had experience covering an area with sound will understand the typical dilemma that comes along with it. Large speakers have a loud voice but they are bulky and hard to handle. Small speakers on the other hand are light and easy to handle but not very effective when it comes to reaching distant listeners. The dB Technologies Ingenia IG2T is one product that has been designed to bridge this gap, hence its continuous mention among portable band and house of worship PA systems.

Here is a quick look into what the speaker is all about and how it compares to what is stated in the specifications.

What is the Ingenia IG2T?

The IG2T is an active column speaker with two ways. dB Technologies claims the device utilizes two 8-inch low frequency drivers and one 1-inch compression driver, powered by a 400W RMS Class-D amplifier with max SPL of 128 dB. “Active” only refers to the internal amplification and processing, meaning you can simply connect the speaker to the audio and power source without an additional amplifier.

The IG2T is one of the models of Ingenia series. One vendor says that dB Technologies produces this series of speakers from 2013; the current range of models is the following: IG1T, IG2T, IG3T and IG4T. There are also TR variants available on dB Technologies website, make sure what model do you actually look for.

What the dB Technologies Ingenia IG2T is

Key Specifications at a Glance

Given that the specifications come from the manufacturer and the biggest US retailer, here’s a quick run-down of the key data:

  • Drivers: 2 x 8” neodymium woofers (2” voice coil) + 1” exit neodymium compression driver with 1.4” titanium voice coil.
  • Amplifier: Digipro G3 Class-D amplifier with 400 W RMS power.
  • Frequency range: 59 to 20,000 Hz at – 10 dB and 63 to 19,200 Hz at – 6 dB.
  • Max SPL: 128 dB.
  • Coverage: 100° horizontally and 80° vertically (vertically asymmetric coverage).
  • Crossover point: 1,900 Hz.
  • Signal processing: 56-bit DSP; 24-bit/48 kHz AD/DA converters; dual-active limiting of peak/RMS/thermal.
  • Inputs/outputs: one combination XLR/jack input and one XLR output + mini USB.
  • Mounting: 36 mm pole-mount; ready for flying with accessories.
  • Size: approx. 228 x 646 x 315 mm.

One important issue: While some sellers label the IG2T as an 800 W speaker, the manufacturer’s website and other sellers list it as a 400 W RMS model. Personally, I would take the manufacturer’s claim and always verify the specification with the seller before making a purchase. Weight is another parameter you should verify.

What makes the Ingenia range unique?

It is time to get into details now because the IG2T is not just another speaker placed in a cylindrical enclosure. There are some design features which make the Ingenia series different.

Asymmetric horn design. The horn is symmetric in horizontal plane, but asymmetric in vertical one. So, what does it mean? It provides even horizontal dispersion, but vertical one is narrowed in its upper part and widened in lower one. Such placement allows directing the sound towards the audience, not the ceiling.

Two speakers stacking. The speaker can work individually, but it can also be combined with another speaker which should be turned over and mounted on it. To do this, there is an infrared technology which detects if the second speaker is used, and there is also an onboard wizard who configures the system for proper coverage. dB claims that the highs combine without any phase problems.

Digital steering. The speaker’s digital processing allows adjusting the dispersion without changing the physical position of the cabinet.

Practical aspects. There is OLED display for mixing, setting coverage and equalization, as well as some accessories for coupling and hanging.

For Whom is It?

Based on the specifications and features, I would say the IG2T is intended for:

  • Individual artists and duos who seek a portable system.
  • Bands requiring FOH sound for small-medium sized venues.
  • Business events that need a clear voice amplification.
  • Churches and community centers in search for a good-looking and even distribution of sound.
  • Small-scale rental businesses who appreciate quick assembly and modular design.

One of the reviewers from Thomann, commenting on a different Ingenia model, claims they have 4 IG2T cabinets and that a column system consisting of 4 boxes (two per side) is amazing. That is one person’s opinion, of course, not an experiment in laboratory conditions, but it gives an idea how this product is used by real users.

Bass?

That’s one honest drawback of any such compact column. The lowest point in the IG2T frequency response range is 59 Hz (-10 dB), which sounds good for the cabinet size but still not good enough to serve as a substitute for a subwoofer when you have to play music rich in bass tones. Indeed, many people complement their columns with subwoofers, and I’ve seen retail sellers offer IG2T columns paired with 15-inch active subwoofers.

For use in case of speech or acoustic or background music, the IG2T might be sufficient. If you have to play DJ or band shows, prepare to use some subs.

Comparison to its Siblings

When choosing between these speakers, according to published technical data, the approximate comparison pattern is the following:

  • IG2T: 400 W RMS power, 2 x 8″ drivers, max SPL 128 dB. Lighter, compact speaker.
  • IG3T: 900 W power, bigger drivers, max SPL 132 dB, and wide vertical coverage (110 x 90°).
  • IG4T: 900 W power with four 6.5-inch woofers.

Therefore, the IG2T belongs to the perfect solution for small-medium sized areas, while IG3T/IG4T – for covering larger audiences.

Advice for Buyers

In case I were buying one, here is how I would go about doing so.

  1. Determine the specific model. There are differences between IG2T and IG2TR; therefore, ensure that you buy the specific model you want by checking the label on it.
  2. Get the exact rating. With 400 W and 800 W issues, you should get confirmation from the dealer and dB Technologies’ official website.
  3. Examine what’s in the package. Some of the equipment is usually sold separately such as the covers, rigging kits and couplers.
  4. Ensure full testing if you buy used. Ensure the controls, amp and drivers work properly.
  5. Think about bass. Ensure that you consider whether you will need a subwoofer.
  6. Compare costs locally. Prices of the equipment vary widely depending on country and seller, and I have bought both used and new units with very varied pricing, so I cannot give a price.
  7. Check warranty and after sales. Official dealers tend to provide better after-sales services.
Buying advice for the Ingenia IG2T active column speaker

Mistakes that Would Be Avoided in the Future

  • Not realizing that there are certain dimensions it can fill. Compact column speakers are not meant to fit all rooms.
  • Ignoring the position. The height and positioning of the speaker is as important as the speaker itself.
  • Assuming that everything stated in listings is true. From the above examples, it is clear that different retail sites describe speakers differently.
  • Failing to conduct a sound check. Test the speaker before an event in the real venue.
  • Omitting the accessories. The poles, stands, and coverings will be part of the cost.

Closing Remarks

The dB Technologies Ingenia IG2T is an intelligent product: small, modular, easy to set up, and designed specifically for those who need proper coverage but not heavy equipment. Intelligent horn design, coupling mechanism, and onboard processing – all of these make the IG2T stand out. The shortcomings of the product are quite standard for this kind of cabinet and include limited low-end extension and maximum throw in very large spaces.

My recommendation would be to write down the dimensions of your rooms, content type, and whether you will require subwoofers or not. After that, compare the IG2T against the IG3T and other competing column speakers.

In case you work in a business dealing with renting or selling audio equipment and wish to automate processes related to bookings or follow-ups, you are welcome to learn more about our products at Aura Flow Tech.

Sources

Scroll to Top